46057-STATGUARD CONDUCTIVE EPOXY COATING LIGHT GRAY, 4 GAL KIT

46057-STATGUARD CONDUCTIVE EPOXY COATING LIGHT GRAY, 4 GAL KIT              

46057 - Statguard® Conductive Light Gray Epoxy, 4 Gal Kit

Pricing
Qty: 1 $2210.00

In-stock orders will ship in 3 business days or less after receipt of order.

30 Available.

Other Quantities - Contact Us.

Sold Per: EA

Estimated Shipping Weight: 47.00 lb

Stock Location: CANTON, MA

Country Of Origin: USA

Quantity:


 



  • Conductive Epoxide Polymer Floor Coating
    Provides a flooring surface that does not generate a static charge and will act as part of the path-to-ground for an operator wearing ESD footwear.
  • Conductive (Rtt and Rtg 1 x 104 to < 1 x 106 ohms per ANSI/ESD STM7.1 or IEC 61340-4-1)
    The surface resistance range will remain low enough to act as a path-to-ground with normal dirt and grime build-up on a floor and meet the required limits of ANSI/ESD S20.20 (< 1 x 109 ohms) for a footwear / flooring system.
  • One Coat, 2-part, Water-Based Epoxy System
    Mix 4 gallon pre-measured part A and B together and install with squeegee and nap roller.
  • 50% Solids by Volume
    Reduces dry time. Estimated Coverage Per Gallon = 200 sq ft. at 8 mil (0.008" thick).
  • Statguard® Conductive Epoxy should not be allowed to freeze. If the epoxy part A or part B freezes surround the closed container with hot water to thaw completely and melt the crystals back into liquid. Make sure epoxy is then brought up to room temperature 70°F (20°C) before mixing and using. Store at temperatures above 50 °F (10°C) as stated in the Safety Data Sheet.
  • Made in the United States of America
    Made and Stocked in Canton, MA.
Show more details...
Hide details...
  • TB-7039 - Statguard® Conductive Epoxy Application Instructions

Statguard® Conductive Epoxy Application Tutorial | Statguard Flooring